 (1).jpg)
_(1).jpg)
_(2).jpg)
_(4).jpg)
_(5).jpg)
_(6).jpg)
_(7).jpg)
_(8).jpg)
_(9).jpg)
_(10).jpg)
_(11).JPG)
HAAS TL-15 2008 £POA
C axis & Milling, Tool setter, Coolant, Interlocked guards, Low Volt Light, 3 Jaw Chuck, Magazine Barfeed, Parts Catcher, Tooling, Swarf Auger, Sub Spindle
| Control | Haas |
| Swing over the Cross-slide | 241 mm |
| Bar Capacity | 52 mm |
| C axis | 0.01 degree |
| Chuck Size | 210mm (8") |
| Distance Between Centres | 323mm |
| Main Motor | 20 HP |
| Maximum Cutting Diameter | 208 mm |
| Maximum Cutting Length | 445 mm |
| Swing | 584 mm |
| Turret Positions | 12 Station |
| Rapid Feedrates | 30.5M/MINUTE |
| Spindle Motor Power | 20Hp |
| Spindle Nose | A2-6 |
| Spindle Speed | 4000 rpm |
| Sub Spindle Bore | 30mm |
| Sub Spindle Motor Power | 8Hp |
| Sub Spindle Speed | 4000rpm |
| Milling RPM | 3000RPM |
| Tooling Configuration | Hybrid BOT/VDI |
| Machine Dimensions | 3277 x 2286 x 1829mm |
| csinál | HAAS |
| modell | TL-15 |
| év | 2008 |
| sorozatszám | 3080616 |
| típus | CNC Lathes with Milling |
| ár | £POA |
| elhelyezkedés | Leicester |
DELIVERY
Delivery ex works, subject to prior sale Transport, siting & commissioning extra at cost
TERMS & CONDITIONS
The above information has been obtained to the best of our ability and belief, and from manufacturers where possible. It is given in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not form a representation or constitute a contractual term. We advise you to check any vital details To download our full terms and conditions of sale please click here https://drive.google.com/file/d/1ZL9fW3mOUz3GzHS_eU2Rim4fN-8H075d/view?usp=sharing
 (1).jpg)
 (1).JPG)
 (23).JPG)