 (14).JPG)
_(1)2.jpg)
_(2)1.jpg)
_(3)1.jpg)
_(4)1.jpg)
_(6).JPG)
_(7).JPG)
_(8).JPG)
_(9).JPG)
_(10).JPG)
_(11).JPG)
_(12).JPG)
_(13).JPG)
_(14).JPG)
_(15).JPG)
_(16).JPG)
_(17).JPG)
_(18).JPG)
_(19).JPG)
HAAS ST-10Y 2020 £POA
Swarf Conveyor, C axis & Milling, Tool setter, Coolant, Y-axis, Tailstock, Interlocked guards, Low Volt Light, 3 Jaw Chuck, USB Port
| Control | HAAS |
| Hours Run | 3 |
| Swing Over Carriage | 413mm |
| Bar Capacity | 44mm |
| C axis | 0.01 degrees |
| Maximum Cutting Diameter | 229mm |
| Maximum Cutting Length | 356mm |
| Swing | 641mm |
| Turret Positions | 12 Station |
| Rapid Feedrates | XYZ: 30.5 x 12.7 x 30.5m/minute |
| Spindle Motor Power | 15Hp |
| Spindle Nose | A2-5 |
| Spindle Speed | 6000rpm |
| Milling RPM | 6000rpm |
| X axis Travel | 200mm |
| Y axis Travel | +/-50mm |
| Z axis Travel | 355mm |
| Machine Dimensions | 3048 x 2108 x 1803mm |
| csinál | HAAS |
| modell | ST-10Y |
| év | 2020 |
| sorozatszám | 3119958 |
| típus | CNC Lathes with Milling |
| ár | £POA |
| a mi referenciánk | PM8799 |
| elhelyezkedés | Leicester |
DELIVERY
Delivery ex works, subject to prior sale Transport, siting & commissioning extra at cost
TERMS & CONDITIONS
The above information has been obtained to the best of our ability and belief, and from manufacturers where possible. It is given in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not form a representation or constitute a contractual term. We advise you to check any vital details To download our full terms and conditions of sale please click here https://drive.google.com/file/d/1ZL9fW3mOUz3GzHS_eU2Rim4fN-8H075d/view?usp=sharing
 (1).jpg)
 (1).JPG)
 (23).JPG)