 (1).JPG)
_(2)1.JPG)
_(1)1.JPG)
_(4)1.JPG)
_(6)1.JPG)
_(7)1.JPG)
_(8)1.JPG)
_(9)1.JPG)
_(10)1.JPG)
_(11)1.JPG)
_(12)1.JPG)
_(13).JPG)
Doosan Puma 2100SY 2012 £POA
Swarf Conveyor, C axis & Milling, Tool setter, Coolant, Y-axis, Interlocked guards, Low Volt Light, 3 Jaw Chuck, Magazine Barfeed, Parts Catcher, Manuals, Tooling, C Axis (0.001degree) on Sub Spindle, Sub Spindle, Parts Conveyor
| Control | Fanuc I Series |
| Swing over the Cross-slide | 630 mm |
| Bar Capacity | 65 mm |
| C axis | 0.001 degrees |
| Main Motor | 18.5kW |
| Maximum Cutting Diameter | 406mm |
| Maximum Cutting Length | 520mm |
| Swing | 780 mm |
| Turret Positions | 12 Station |
| Rapid Feedrates | X,Z,Y,B: 30 x 30 x 30 x 10m/min |
| Spindle Bore | 76mm |
| Spindle Nose | A2-6 |
| Spindle Speed | 4500 rpm |
| Sub Spindle C axis | 0.001 degrees |
| Sub Spindle Motor | 7.5kW |
| Sub Spindle Nose | A2-5 |
| Sub Spindle Speed | 4500 rpm |
| Sub Spindle Stroke | 590mm |
| Barfeed | Iemca KID 80 Short Magazine |
| Milling RPM | 5,000 rpm |
| X axis Travel | 260 mm |
| Y axis Travel | -/+ 51mm |
| Z axis Travel | 590 mm |
| Machine Dimensions | 4310 x 1863 x 2163mm |
| Machine Weight | 5900 kgs |
| csinál | Doosan |
| modell | Puma 2100SY |
| év | 2012 |
| sorozatszám | ML0094-000373 |
| típus | CNC Lathes with Milling |
| ár | £POA |
| elhelyezkedés | Leicester |
DELIVERY
Delivery ex works, subject to prior sale Transport, siting & commissioning extra at cost
TERMS & CONDITIONS
The above information has been obtained to the best of our ability and belief, and from manufacturers where possible. It is given in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not form a representation or constitute a contractual term. We advise you to check any vital details To download our full terms and conditions of sale please click here https://drive.google.com/file/d/1ZL9fW3mOUz3GzHS_eU2Rim4fN-8H075d/view?usp=sharing
 (1).jpg)
 (1).JPG)
 (23).JPG)